Water level float switches can
be mounted in one of two ways below.
If
a cable type floats switch is
mounted by this way, generally the cable is attached to an inlet/outlet pipe
located inside the tank. The cable is usually attached to the pipe by using a
specially designed stainless steel clamp.
When
the water level float switch can
be suspended from the top of the tank, then you can use a cable weight to hold
the float switch at the correct level. Cable weight is usually available as an
optional extra when ordering float switches. These weights are clipped onto the
cable and are easy to adjust. You need to apply some caution in using suspended
floats switches in tanks where there is a strong swirling action.
It must
be very careful in the process of installing float switches near submerged
object such as pumps and pipes. Make sure that the float cannot wedge itself
under, on-top or against any object.
Xian Neko Electric Co.,Ltd